Process atmospheric fields. More...

Public Member Functions
subroutine, public	atmosphere_driver (localpet)
	Driver routine to process for atmospheric fields. More...

subroutine	create_atm_b4adj_esmf_fields
	Create target grid field objects to hold data before vertical interpolation. More...

subroutine	terp3 (IM, IXZ1, IXQ1, IXZ2, IXQ2, NM, NXQ1, NXQ2, KM1, KXZ1, KXQ1, Z1, Q1, KM2, KXZ2, KXQ2, Z2, Q2)
	Cubically interpolate in one dimension. More...

Data Fields
type(esmf_field), public	delp_target_grid
	pressure thickness More...

type(esmf_field), public	dzdt_target_grid
	vertical velocity More...

integer, public	lev_target
	num vertical levels More...

integer, public	levp1_target
	num levels plus 1 More...

integer, public	nvcoord_target
	num vertical coordinate variables More...

type(esmf_field), public	ps_target_grid
	surface pressure More...

type(esmf_field), public	qnifa_climo_target_grid
	number concentration of ice friendly aerosols on target horiz/vert grid. More...

type(esmf_field), public	qnwfa_climo_target_grid
	number concentration of water friendly aerosols on target horiz/vert grid. More...

type(esmf_field), public	temp_target_grid
	temperautre More...

type(esmf_field), dimension(:), allocatable, public	tracers_target_grid
	tracers More...

type(esmf_field), public	u_s_target_grid
	u-wind, 'south' edge More...

type(esmf_field), public	u_w_target_grid
	u-wind, 'west' edge More...

type(esmf_field), public	v_s_target_grid
	v-wind, 'south' edge More...

type(esmf_field), public	v_w_target_grid
	v-wind, 'west' edge More...

real(esmf_kind_r8), dimension(:,:), allocatable, public	vcoord_target
	vertical coordinate More...

type(esmf_field), public	zh_target_grid
	3-d height More...

Private Member Functions
subroutine	cleanup_target_atm_b4adj_data
	Cleanup atmospheric field (before adjustment) objects. More...

subroutine	cleanup_target_atm_data
	Cleanup target grid atmospheric field objects. More...

subroutine	compute_zh
	Compute vertical level height. More...

subroutine	convert_winds
	Convert 3-d component winds to u and v. More...

subroutine	create_atm_esmf_fields
	Create target grid field objects. More...

subroutine	horiz_interp_thomp_mp_climo
	Horizontally interpolate thompson microphysics data to the target model grid. More...

subroutine	newpr1 (localpet)
	Computes 3-D pressure given an adjusted surface pressure. More...

subroutine	newps (localpet)
	Computes adjusted surface pressure given a new terrain height. More...

subroutine	read_vcoord_info
	Reads model vertical coordinate definition file (as specified by namelist variable vcoord_file_target_grid). More...

subroutine	rsearch (IM, KM1, IXZ1, KXZ1, Z1, KM2, IXZ2, KXZ2, Z2, IXL2, KXL2, L2)
	Search for a surrounding real interval. More...

subroutine	vintg
	Vertically interpolate upper-air fields. More...

subroutine	vintg_thomp_mp_climo
	Vertically interpolate atmospheric fields to target FV3 grid. More...

subroutine	vintg_wam (YEAR, MONTH, DAY, HOUR)
	Vertically extend model top into thermosphere for whole atmosphere model. More...

Private Attributes
type(esmf_field)	dzdt_b4adj_target_grid
	vertical vel before vert adj More...

type(esmf_field)	pres_b4adj_target_grid
	3-d pres before terrain adj More...

type(esmf_field)	pres_target_grid
	3-d pressure More...

type(esmf_field)	ps_b4adj_target_grid
	sfc pres before terrain adj More...

type(esmf_field)	qnifa_climo_b4adj_target_grid
	number concentration of ice friendly aerosols before vert adj More...

type(esmf_field)	qnwfa_climo_b4adj_target_grid
	number concentration of water friendly aerosols before vert adj More...

type(esmf_field)	temp_b4adj_target_grid
	temp before vert adj More...

type(esmf_field)	terrain_interp_to_target_grid
	Input grid terrain interpolated to target grid. More...

type(esmf_field)	thomp_pres_climo_b4adj_target_grid
	pressure of each level on target grid More...

type(esmf_field), dimension(:), allocatable	tracers_b4adj_target_grid
	tracers before vert adj More...

type(esmf_field)	wind_b4adj_target_grid
	3-d wind before vert adj More...

type(esmf_field)	wind_s_target_grid
	3-d wind, 'south' edge More...

type(esmf_field)	wind_target_grid
	3-d wind, grid box center More...

type(esmf_field)	wind_w_target_grid
	3-d wind, 'west' edge More...

Detailed Description

Process atmospheric fields.

Horizontally interpolate from input to target FV3 grid using ESMF regridding. Adjust surface pressure according to terrain differences between input and target grid. Vertically interpolate to target FV3 grid vertical levels. Processing based on the spectral GFS version of CHGRES.

For variables "b4adj" indicates fields on the target grid before vertical adjustment. "target" indicates data on target grid. "input" indicates data on input grid. "_s" indicates fields on the 'south' edge of the grid box. "_w" indicate fields on the 'west' edge of the grid box. Otherwise, fields are at the center of the grid box.

Author: George Gayno NCEP/EMC

Definition at line 19 of file atmosphere.F90.

Member Function/Subroutine Documentation

subroutine, public atmosphere::atmosphere_driver ( integer, intent(in) localpet )

Driver routine to process for atmospheric fields.

Parameters

[in] localpet ESMF local persistent execution thread

Author: George Gayno

Definition at line 114 of file atmosphere.F90.

References input_data::cleanup_input_atm_data(), cleanup_target_atm_b4adj_data(), cleanup_target_atm_data(), compute_zh(), convert_winds(), create_atm_b4adj_esmf_fields(), create_atm_esmf_fields(), error_handler(), horiz_interp_thomp_mp_climo(), newpr1(), newps(), input_data::read_input_atm_data(), thompson_mp_climo_data::read_thomp_mp_climo_data(), read_vcoord_info(), vintg(), vintg_thomp_mp_climo(), vintg_wam(), write_fv3_atm_bndy_data_netcdf(), write_fv3_atm_data_netcdf(), and write_fv3_atm_header_netcdf().

Referenced by chgres().

subroutine atmosphere::cleanup_target_atm_b4adj_data ( )

private

Cleanup atmospheric field (before adjustment) objects.

Author: George Gayno

Definition at line 2166 of file atmosphere.F90.

Referenced by atmosphere_driver().

subroutine atmosphere::cleanup_target_atm_data ( )

private

Cleanup target grid atmospheric field objects.

Author: George Gayno

Definition at line 2191 of file atmosphere.F90.

Referenced by atmosphere_driver().

subroutine atmosphere::compute_zh ( )

private

Compute vertical level height.

Author: George Gayno

Definition at line 2076 of file atmosphere.F90.

References error_handler().

Referenced by atmosphere_driver().

subroutine atmosphere::convert_winds ( )

private

Convert 3-d component winds to u and v.

Author: George Gayno

Definition at line 653 of file atmosphere.F90.

References error_handler().

Referenced by atmosphere_driver(), input_data::read_input_atm_gaussian_nemsio_file(), input_data::read_input_atm_gaussian_netcdf_file(), input_data::read_input_atm_gfs_gaussian_nemsio_file(), input_data::read_input_atm_gfs_sigio_file(), input_data::read_input_atm_grib2_file(), input_data::read_input_atm_restart_file(), and input_data::read_input_atm_tiled_history_file().

subroutine atmosphere::create_atm_b4adj_esmf_fields ( )

Create target grid field objects to hold data before vertical interpolation.

These will be defined with the same number of vertical levels as the input grid.

Author: George Gayno

Definition at line 440 of file atmosphere.F90.

References error_handler().

Referenced by atmosphere_driver().

subroutine atmosphere::create_atm_esmf_fields ( )

private

Create target grid field objects.

Author: George Gayno

Definition at line 514 of file atmosphere.F90.

References error_handler().

Referenced by atmosphere_driver().

subroutine atmosphere::horiz_interp_thomp_mp_climo ( )

private

Horizontally interpolate thompson microphysics data to the target model grid.

Author: George Gayno

Definition at line 1140 of file atmosphere.F90.

References thompson_mp_climo_data::cleanup_thomp_mp_climo_input_data(), and error_handler().

Referenced by atmosphere_driver().

subroutine atmosphere::newpr1 ( integer, intent(in) localpet )

private

Computes 3-D pressure given an adjusted surface pressure.

program history log: 2005-04-11 Hann-Ming Henry Juang hybrid sigma, sigma-p, and sigma-

PRGMMR: Henry Juang ORG: W/NMC23 DATE: 2005-04-11
PRGMMR: Fanglin Yang ORG: W/NMC23 DATE: 2006-11-28
PRGMMR: S. Moorthi ORG: NCEP/EMC DATE: 2006-12-12
PRGMMR: S. Moorthi ORG: NCEP/EMC DATE: 2007-01-02

INPUT ARGUMENT LIST: IM INTEGER NUMBER OF POINTS TO COMPUTE KM INTEGER NUMBER OF LEVELS IDVC INTEGER VERTICAL COORDINATE ID (1 FOR SIGMA AND 2 FOR HYBRID) IDSL INTEGER TYPE OF SIGMA STRUCTURE (1 FOR PHILLIPS OR 2 FOR MEAN) NVCOORD INTEGER NUMBER OF VERTICAL COORDINATES VCOORD REAL (KM+1,NVCOORD) VERTICAL COORDINATE VALUES FOR IDVC=1, NVCOORD=1: SIGMA INTERFACE FOR IDVC=2, NVCOORD=2: HYBRID INTERFACE A AND B FOR IDVC=3, NVCOORD=3: JUANG GENERAL HYBRID INTERFACE AK REAL (KM+1) HYBRID INTERFACE A BK REAL (KM+1) HYBRID INTERFACE B PS REAL (IX) SURFACE PRESSURE (PA) OUTPUT ARGUMENT LIST: PM REAL (IX,KM) MID-LAYER PRESSURE (PA) DP REAL (IX,KM) LAYER DELTA PRESSURE (PA)

Parameters

[in] localpet ESMF local persistent execution thread

Author: Hann Ming Henry Juang, Juang, Fanglin Yang, S. Moorthi

Definition at line 797 of file atmosphere.F90.

References error_handler().

Referenced by atmosphere_driver().

subroutine atmosphere::newps ( integer, intent(in) localpet )

private

Computes adjusted surface pressure given a new terrain height.

Computes a new surface pressure given a new orography. The new pressure is computed assuming a hydrostatic balance and a constant temperature lapse rate. Below ground, the lapse rate is assumed to be -6.5 k/km.

program history log:

91-10-31 mark iredell
2018-apr adapt for fv3. george gayno

Parameters

[in] localpet ESMF local persistent execution thread

Author: Mark Iredell, George Gayno

Date: 92-10-31

Definition at line 908 of file atmosphere.F90.

References error_handler().

Referenced by atmosphere_driver().

subroutine atmosphere::read_vcoord_info ( )

private

Reads model vertical coordinate definition file (as specified by namelist variable vcoord_file_target_grid).

Author: George Gayno

Definition at line 1105 of file atmosphere.F90.

References error_handler().

Referenced by atmosphere_driver().

subroutine atmosphere::rsearch	(	integer, intent(in)	IM,
		integer, intent(in)	KM1,
		integer, intent(in)	IXZ1,
		integer, intent(in)	KXZ1,
		real(esmf_kind_r8), dimension(1+(im-1)ixz1+(km1-1)kxz1), intent(in)	Z1,
		integer, intent(in)	KM2,
		integer, intent(in)	IXZ2,
		integer, intent(in)	KXZ2,
		real(esmf_kind_r8), dimension(1+(im-1)ixz2+(km2-1)kxz2), intent(in)	Z2,
		integer, intent(in)	IXL2,
		integer, intent(in)	KXL2,
		integer, dimension(1+(im-1)ixl2+(km2-1)kxl2), intent(out)	L2
	)

private

Search for a surrounding real interval.

This subprogram searches monotonic sequences of real numbers for intervals that surround a given search set of real numbers. The sequences may be monotonic in either direction; the real numbers may be single or double precision; the input sequences and sets and the output locations may be arbitrarily dimensioned.

If the array z1 is dimensioned (im,km1), then the skip numbers are ixz1=1 and kxz1=im; if it is dimensioned (km1,im), then the skip numbers are ixz1=km1 and kxz1=1; if it is dimensioned (im,jm,km1), then the skip numbers are ixz1=1 and kxz1=im*jm; etcetera. Similar examples apply to the skip numbers for z2 and l2.

Returned values of 0 or km1 indicate that the given search value is outside the range of the sequence.

If a search value is identical to one of the sequence values then the location returned points to the identical value. If the sequence is not strictly monotonic and a search value is identical to more than one of the sequence values, then the location returned may point to any of the identical values.

to be exact, for each i from 1 to im and for each k from 1 to km2, z=z2(1+(i-1)*ixz2+(k-1)*kxz2) is the search value and l=l2(1+(i-1)*ixl2+(k-1)*kxl2) is the location returned. if l=0, then z is less than the start point z1(1+(i-1)*ixz1) for ascending sequences (or greater than for descending sequences). if l=km1, then z is greater than or equal to the end point z1(1+(i-1)*ixz1+(km1-1)*kxz1) for ascending sequences (or less than or equal to for descending sequences). otherwise z is between the values z1(1+(i-1)*ixz1+(l-1)*kxz1) and z1(1+(i-1)*ixz1+(l-0)*kxz1) and may equal the former.

Parameters

[in]	im	integer number of sequences to search
[in]	km1	integer number of points in each sequence
[in]	ixz1	integer sequence skip number for z1
[in]	kxz1	integer point skip number for z1
[in]	z1	real (1+(im-1)ixz1+(km1-1)kxz1) sequence values to search (z1 must be monotonic in either direction)
[in]	km2	integer number of points to search for in each respective sequence
[in]	ixz2	integer sequence skip number for z2
[in]	kxz2	integer point skip number for z2
[in]	z2	real (1+(im-1)ixz2+(km2-1)kxz2) set of values to search for (z2 need not be monotonic)
[in]	ixl2	integer sequence skip number for l2
[in]	kxl2	integer point skip number for l2
[out]	l2	integer (1+(im-1)ixl2+(km2-1)kxl2) interval locations having values from 0 to km1 (z2 will be between z1(l2) and z1(l2+1))

Author: Mark Iredell

Date: 98-05-01

Definition at line 2028 of file atmosphere.F90.

Referenced by terp3().

subroutine atmosphere::terp3	(	integer	IM,
		integer	IXZ1,
		integer	IXQ1,
		integer	IXZ2,
		integer	IXQ2,
		integer	NM,
		integer	NXQ1,
		integer	NXQ2,
		integer	KM1,
		integer	KXZ1,
		integer	KXQ1,
		real(esmf_kind_r8), dimension(1+(im-1)ixz1+(km1-1)kxz1)	Z1,
		real(esmf_kind_r8), dimension(1+(im-1)ixq1+(km1-1)kxq1+(nm-1)*nxq1)	Q1,
		integer	KM2,
		integer	KXZ2,
		integer	KXQ2,
		real(esmf_kind_r8), dimension(1+(im-1)ixz2+(km2-1)kxz2)	Z2,
		real(esmf_kind_r8), dimension(1+(im-1)ixq2+(km2-1)kxq2+(nm-1)*nxq2)	Q2
	)

Cubically interpolate in one dimension.

Interpolate field(s) in one dimension along the column(s). The interpolation is cubic lagrangian with a monotonic constraint in the center of the domain. In the outer intervals it is linear. Outside the domain, fields are held constant.

PROGRAM HISTORY LOG:

98-05-01 MARK IREDELL
1999-01-04 IREDELL USE ESSL SEARCH

Parameters

[in]	im	integer number of columns
[in]	ixz1	integer column skip number for z1
[in]	ixq1	integer column skip number for q1
[in]	ixz2	integer column skip number for z2
[in]	ixq2	integer column skip number for q2
[in]	nm	integer number of fields per column
[in]	nxq1	integer field skip number for q1
[in]	nxq2	integer field skip number for q2
[in]	km1	integer number of input points
[in]	kxz1	integer point skip number for z1
[in]	kxq1	integer point skip number for q1
[in]	z1	real (1+(im-1)ixz1+(km1-1)kxz1) input coordinate values in which to interpolate (z1 must be strictly monotonic in either direction)
[in]	q1	real (1+(im-1)ixq1+(km1-1)kxq1+(nm-1)*nxq1) input fields to interpolate
[in]	km2	integer number of output points
[in]	kxz2	integer point skip number for z2
[in]	kxq2	integer point skip number for q2
[in]	z2	real (1+(im-1)ixz2+(km2-1)kxz2) output coordinate values to which to interpolate (z2 need not be monotonic)
[out]	q2	real (1+(im-1)ixq2+(km2-1)kxq2+(nm-1)*nxq2) output interpolated fields

Author: Mark Iredell

Date: 98-05-01

Definition at line 1834 of file atmosphere.F90.

References rsearch().

Referenced by vintg(), and vintg_thomp_mp_climo().

subroutine atmosphere::vintg ( )

private

Vertically interpolate upper-air fields.

Vertically interpolate upper-air fields. Wind, temperature, humidity and other tracers are interpolated. The interpolation is cubic lagrangian in log pressure with a monotonic constraint in the center of the domain. In the outer intervals it is linear in log pressure. Outside the domain, fields are generally held constant, except for temperature and humidity below the input domain, where the temperature lapse rate is held fixed at -6.5 k/km and the relative humidity is held constant. This routine expects fields ordered from bottom to top of atmosphere.

Author: Mark Iredell

Date: 92-10-31

Definition at line 1601 of file atmosphere.F90.

References error_handler(), and terp3().

Referenced by atmosphere_driver().

subroutine atmosphere::vintg_thomp_mp_climo ( )

private

Vertically interpolate atmospheric fields to target FV3 grid.

Vertically interpolate thompson microphysics climo tracers to the target model levels.

Author: George Gayno

Definition at line 1252 of file atmosphere.F90.

References error_handler(), and terp3().

Referenced by atmosphere_driver().

subroutine atmosphere::vintg_wam	(	integer, intent(in)	YEAR,
		integer, intent(in)	MONTH,
		integer, intent(in)	DAY,
		integer, intent(in)	HOUR
	)

private

Vertically extend model top into thermosphere for whole atmosphere model.

Use climatological data to extent model top into thermosphere for temperature and consoder primary compositions of neutral atmosphere in term of specific values of oxygen, single oxygen, and ozone.

Parameters

[in]	year	initial year
[in]	month	initial month
[in]	day	initial day
[in]	hour	initial hour

Author: Hann-Ming Henry Juang NCEP/EMC

Definition at line 1375 of file atmosphere.F90.

References error_handler(), and gettemp().

Referenced by atmosphere_driver().

Field Documentation

type(esmf_field), public atmosphere::delp_target_grid

pressure thickness

Definition at line 69 of file atmosphere.F90.

type(esmf_field) atmosphere::dzdt_b4adj_target_grid

private

vertical vel before vert adj

Definition at line 71 of file atmosphere.F90.

type(esmf_field), public atmosphere::dzdt_target_grid

vertical velocity

Definition at line 70 of file atmosphere.F90.

integer, public atmosphere::lev_target

num vertical levels

Definition at line 63 of file atmosphere.F90.

integer, public atmosphere::levp1_target

num levels plus 1

Definition at line 64 of file atmosphere.F90.

integer, public atmosphere::nvcoord_target

num vertical coordinate variables

Definition at line 65 of file atmosphere.F90.

type(esmf_field) atmosphere::pres_b4adj_target_grid

private

3-d pres before terrain adj

Definition at line 77 of file atmosphere.F90.

type(esmf_field) atmosphere::pres_target_grid

private

3-d pressure

Definition at line 76 of file atmosphere.F90.

type(esmf_field) atmosphere::ps_b4adj_target_grid

private

sfc pres before terrain adj

Definition at line 75 of file atmosphere.F90.

type(esmf_field), public atmosphere::ps_target_grid

surface pressure

Definition at line 74 of file atmosphere.F90.

type(esmf_field) atmosphere::qnifa_climo_b4adj_target_grid

private

number concentration of ice friendly aerosols before vert adj

Definition at line 93 of file atmosphere.F90.

type(esmf_field), public atmosphere::qnifa_climo_target_grid

number concentration of ice friendly aerosols on target horiz/vert grid.

Definition at line 95 of file atmosphere.F90.

type(esmf_field) atmosphere::qnwfa_climo_b4adj_target_grid

private

number concentration of water friendly aerosols before vert adj

Definition at line 98 of file atmosphere.F90.

type(esmf_field), public atmosphere::qnwfa_climo_target_grid

number concentration of water friendly aerosols on target horiz/vert grid.

Definition at line 100 of file atmosphere.F90.

type(esmf_field) atmosphere::temp_b4adj_target_grid

private

temp before vert adj

Definition at line 79 of file atmosphere.F90.

type(esmf_field), public atmosphere::temp_target_grid

temperautre

Definition at line 78 of file atmosphere.F90.

type(esmf_field) atmosphere::terrain_interp_to_target_grid

private

Input grid terrain interpolated to target grid.

Definition at line 80 of file atmosphere.F90.

type(esmf_field) atmosphere::thomp_pres_climo_b4adj_target_grid

private

pressure of each level on target grid

Definition at line 103 of file atmosphere.F90.

type(esmf_field), dimension(:), allocatable atmosphere::tracers_b4adj_target_grid

private

tracers before vert adj

Definition at line 73 of file atmosphere.F90.

type(esmf_field), dimension(:), allocatable, public atmosphere::tracers_target_grid

tracers

Definition at line 72 of file atmosphere.F90.

type(esmf_field), public atmosphere::u_s_target_grid

u-wind, 'south' edge

Definition at line 81 of file atmosphere.F90.

type(esmf_field), public atmosphere::u_w_target_grid

u-wind, 'west' edge

Definition at line 86 of file atmosphere.F90.

type(esmf_field), public atmosphere::v_s_target_grid

v-wind, 'south' edge

Definition at line 82 of file atmosphere.F90.

type(esmf_field), public atmosphere::v_w_target_grid

v-wind, 'west' edge

Definition at line 87 of file atmosphere.F90.

real(esmf_kind_r8), dimension(:,:), allocatable, public atmosphere::vcoord_target

vertical coordinate

Definition at line 67 of file atmosphere.F90.

type(esmf_field) atmosphere::wind_b4adj_target_grid

private

3-d wind before vert adj

Definition at line 84 of file atmosphere.F90.

type(esmf_field) atmosphere::wind_s_target_grid

private

3-d wind, 'south' edge

Definition at line 85 of file atmosphere.F90.

type(esmf_field) atmosphere::wind_target_grid

private

3-d wind, grid box center

Definition at line 83 of file atmosphere.F90.

type(esmf_field) atmosphere::wind_w_target_grid

private

3-d wind, 'west' edge

Definition at line 88 of file atmosphere.F90.

type(esmf_field), public atmosphere::zh_target_grid

3-d height

Definition at line 89 of file atmosphere.F90.

The documentation for this module was generated from the following file:

/gpfs/dell2/emc/modeling/noscrub/George.Gayno/ufs_utils.git/UFS_UTILS.upstream/sorc/chgres_cube.fd/atmosphere.F90

Public Member Functions

Data Fields

Private Member Functions

Private Attributes

Detailed Description

Member Function/Subroutine Documentation

Field Documentation